How to Install Firmware on Huawei Clone P20 P20 Pro with MT6580 MT6572 Chipset
How to Install Firmware on Huawei Clone P20 P20 Pro with MT6580 MT6572 Chipset
If you have a Huawei Clone P20 P20 Pro device with MediaTek MT6580 or MT6572 chipset, you may need to flash the firmware on it for various reasons. For example, you may want to upgrade or downgrade the Android version, fix software issues, remove FRP lock, or unbrick the device. In this article, we will show you how to install firmware on Huawei Clone P20 P20 Pro with MT6580 MT6572 chipset using the SP Flash Tool.
Huawei Clone P20 P20 Pro Flash File Firmware MT6580 MT6572
What is Firmware and Why Do You Need It?
Firmware is a software program that controls the hardware and functionality of a device. It is also known as stock ROM or flash file. Firmware is usually stored in the internal memory or flash chip of the device. Sometimes, the firmware may get corrupted or outdated due to various reasons, such as virus attack, improper installation, power failure, etc. This may cause the device to malfunction or become unusable. In such cases, you need to flash the firmware on the device to restore it to its original state.
What is SP Flash Tool and How Does It Work?
SP Flash Tool is a software application that allows you to flash firmware on MediaTek devices. It is also known as Smartphone Flash Tool. SP Flash Tool works by communicating with the device via USB cable and loading the firmware file into the device's memory. Then, it erases the existing firmware and writes the new firmware on the device. SP Flash Tool supports various formats of firmware files, such as scatter file, bin file, pac file, etc.
How to Download Huawei Clone P20 P20 Pro Firmware File?
Before you can install firmware on Huawei Clone P20 P20 Pro, you need to download the firmware file that matches your device model and chipset. You can find many websites that offer firmware files for Huawei Clone P20 P20 Pro with MT6580 MT6572 chipset. However, not all of them are reliable or safe. You should always download firmware files from trusted sources that provide virus-free and tested files. Here are some of the websites that you can visit to download Huawei Clone P20 P20 Pro firmware file:
NeedFlashRom
FirmwareFile
ROM-Provider
AndroidFixFlashFile
ROM-Provider (for MT6572 chipset)
After downloading the firmware file, you need to extract it using a zip extractor tool such as WinRAR or 7-Zip. You will get a folder containing various files such as scatter file, preloader file, recovery file, etc.
How to Install USB Driver for Huawei Clone P20 P20 Pro?
To flash firmware on Huawei Clone P20 P20 Pro using SP Flash Tool, you need to install the USB driver for your device on your computer. The USB driver allows your computer to recognize and communicate with your device via USB cable. You can download the USB driver for Huawei Clone P20 P20 Pro from here. After downloading the USB driver, you need to install it by following these steps:
Extract the USB driver zip file using a zip extractor tool.
Open the extracted folder and run the setup.exe file.
Follow the on-screen instructions to complete the installation.
Restart your computer after the installation is finished.
How to Install Firmware on Huawei Clone P20 P20 Pro Using SP Flash Tool?
e0e6b7cb5c